Panasonic WJ-ND200K Setup Instructions page 75

I HDD Manual Delete
By setting the date, images on the hard disk that were
recorded up until a day before the set date will be delet-
ed. Click the [DELETE] button after setting the time and
date by clicking the [i] button.
Saving and loading of settings of the setup menu or reset the settings to the default
[Save/Load]
It is possible to save the settings of the setup menu in this unit. It is also possible to call up saved settings (load).
It is also possible to reset the settings to the default with this setup menu.
Screenshot 1
Click the [Maintenance] button on the "Setup" panel and
then click the "Save/Load" tab. The "Save/Load" page
will be displayed.
Step 1
I User Setup Save
Click the [SAVE] button to save the settings of setup
menu in this unit.
I User Setup Load
Click the [LOAD] button to load the saved settings to the
unit.
I Factory Default
Click the [EXECUTE] button to reset the settings to the
default settings.
Important:
• The settings of the menus under "Basic Setup" of
"Comm" will not be reset even when the [LOAD]/
[EXECUTE] button is clicked.
• "NW Link down detection"
• "NW Bandwidth Control"
• "HTTP Port Number"
• "FTP Port Number"
• "Port Setup"
• "DNS Setup"
• When the loading starts, the host authentication will
be set to "OFF" automatically.
75