Facing Detail - Facing Over 1" Thick (Brick) - Travis Industries 21 TRV GreenSmart Installation Manual

Facing Detail – Facing Over 1" Thick (Brick)
WARNING: Any facing that extends in front of the faceplate on the sides or top must be non-
combustible.
NOTE: A 3/8" gap is required above the face for face installation.
Top View
Side View
3-d View
The facing is brought up
to the wall trim.
© Travis Industries
Installation
Framing
Fireplace
3/8"
Face 1/8"
NOTE: When installed, there must be a minimum 1/8" gap
between the face and facing.
Fireplace
Wall Trim
(for qualified installers only)
NOTE: Make sure to leave a 1/8" gap
around the sides of the face and 3/8"
above (for face installation).
Drywall
Non-combustible facing material (brick, stone,
marble, tile) - required if the facing extends in
front of the face on the sides or top.
NOTE: Bring the facing up to the
base of the fireplace.
1/8"
In this example brick is used.
The side facing should be spaced 1/8"
from the face (3/8" from the side of the
fireplace).
4101014
37
100-01208_002