58
Optional Equipment
14
Attach the blue and white wires to the IPI/CPI switch (see Figure 16). Connect the wiring
harness to the stepper motor (see Figure 17).
15
Attach the wiring harness to the comfort control valve connection (see Figure 18).
16
Locate the accent wires that were disconnected earlier. Connect these wires to the wiring on the
control panel. The remote kit includes two power leads. Attach one of these leads to the molex
connector for the accent light (see Figure 19 below).
© Travis Industries
(for qualified installers only)
Figure 16
4101014
Figure 17
Figure 18
Figure 19
100-01208_002