Travis Industries 21 TRV GreenSmart Installation Manual page 62

62 Optional Equipment
20 Attach the receiver to the control panel with the two counter-sunk screws included with the
remote kit (see Figure 31). Place the receiver coverplate (and switch) over the receiver and
attach with the two screws included with the receiver (see Figure 32)
21 Carefully tuck the wiring behind the control panel. Use the included wire ties, if necessary, to
keep all wiring from contacting any hot or moving components. Re-attach the control panel (see
Figure 33)
22 A wall mount is included with this kit for the remote. It may be mounted to the wall for easy
access and storage. Use the included drywall anchors (and screws) to secure it to the wall (see
Figure 34).
23 Restore power to the fireplace and test operation of the remote (see the instructions included with
the remote).
© Travis Industries
(for qualified installers only)
Figure 31
Figure 34
4101014
Figure 32
Figure 33
100-01208_002