Travis Industries 21 TRV GreenSmart Installation Manual page 45

Finalizing the Installation
Left Twig Installation
Place the left twig as shown below. Note how the twig has two protrusions that insert into the screw-
holes on the burner. Make sure the twig does not block any burner holes. Place an ember of the
remaining screw hole.
The two projections on the bottom of the twig
insert into the screw holes on the burner.
Log Installation Overview
Correct view of complete log installation.
© Travis Industries
(for qualified installers only)
4101014
45
Place an ember over this screw.
Place embers in the
firebox corners and
along the front edge
of the burner. Do not
place embers over
burner holes or allow
the embers to block
airflow.
100-01208_002