1.0 Introduction; Features - Trace Engineering RC7 Installation And Operator's Manual

Features

The RC7 and RC7GS (Generator Start) are control units that allow remote
operation of any RV, Legend Series II, Truck Series II, and Mariner inverter/
chargers rated from 2000 to 3000 watts.
NOTE: The generator start functions (GS) only apply to the RV Series inverter/
charger.
NOTE: The inverter and remote control must have software version 1.3x.
The RC7 and RC7GS feature:
•
Simple menu driven programming for full control of all inverter/charger
functions
•
A three-level menu to prevent accidental setting changes
•
Meters to display voltage and current
•
RJ11 phone jack connection to inverter
•
Internal memory to retain inverter/charger menu settings even with a
loss of power
•
An Intelligent battery fuelgauge displaying percent of battery charge
and the time left to run
•
Error message and informative information displays used to optimize
system performance
•
Remote ON/OFF inverter operation
1 999 Trace Engineering
ã
RC7 & RC7GS Remote Controls
Figure 1
RC7 Front Panel

1.0 INTRODUCTION

1