Important Safety Instructions - Trace Engineering RC7 Installation And Operator's Manual

RC7 & RC7GS Remote Controls

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety instructions that should be followed
during the installation and maintenance of this product.
To reduce the risk of electrical shock, and to ensure the safe installation and
operation of this product, the following safety symbols have been placed
throughout this manual to indicate dangerous conditions and important safety
instructions.
WARNING - A dangerous voltage or condition exists in this area.
CAUTION - This procedure is critical to the safe installation or
NOTE -
All electrical work must be done in accordance with local, national,
·
and/or international electrical codes.
Before installing or using this device, read all instructions and cautionary
·
markings located in (or on) the manual, the controller, the batteries,
and the PV array.
Do not expose this unit to rain, snow or liquids of any type. This
·
product is designed only for indoor mounting.
To reduce the chance of short-circuits when installing or working with
·
the inverter, the batteries, or the PV array, use insulated tools.
Remove all jewelry such as rings, bracelets, necklaces, etc., while
·
installing this system. This will greatly reduce the chance of accidental
exposure to live circuits.
The inverter contains more than one live circuit (batteries, PV
·
array, generator, etc.). Power may be present at more than one source.
This product contains no user-serviceable parts. Do not attempt to
·
repair this unit.
iv
Use extreme caution when performing these tasks.
operation of the unit. Follow these instructions closely.
This statement is important. Follow instructions closely.
SAVE THESE INSTRUCTIONS
1 999 Trace Engineering
ã