Upnp Management; Table 23 The Filter Management Parameters - Zte ZXV10 W300 Maintenance Manual

T 2 3 T F
A B L E H E
Parameter
Filter Type
Selection
IP Filter Set
Index
Interface
Direction
IP Filter Rule
Index
Active
Source IP
Address
Subnet Mask
Port Number
Destination IP
Address
Subnet Mask
Port Number
Protocol
Rule Unmatched
Click SAVE to submit the changes, or DELETE to delete the rule with the
parameters, or CANCEL to exit without saving.

UPnP Management

Universal Plug and Play (UPnP) is an open networking standard that uses
TCP/IP for simple peer-to-peer network connectivity between devices. An
M
I L T E R A N A G E M E N T
Description
Select the IP filter to be viewed
Select the IP filter set to be modified
Select the interface to be modified. PV0~PV7 and WAN
interfaces.
Select which direction of data flow to apply to the filters.
Select IP filter rule index to be modified.
Toggle this rule index ON or OF with Yes or No.
Enter the source IP address to deny access to the W300 router.
Enter the subnet mask of the source IP address.
Enter the port number of the source IP address. 0 means that all
ports are allowed.
Enter the destination IP address to deny access to the W300
router.
Enter the subnet mask of the destination IP address.
Enter the port number of the destination IP address. 0 means
that all ports are allowed.
Select the protocol to filter.
Select what happens to the data in question if the rule currently
editing is unmatched. Next means that the data is then
compared to the next IP filter rule. Forward means that the data
will be allowed into the user system.
Proprietary Information of ZTE CORPORATION
Chapter 2 - Product Installation
P
A R A M E T E R S
41