Chapter 9; Troubleshooting; Table 26 Troubleshooting - Zte ZXV10 W300 Maintenance Manual

C h a p t e r

Troubleshooting

This chapter describes how to troubleshoot problems when installing and usi
ng a W300. For any problems not addressed here; contact the service provid
er for help.
T 2 6 T
A B L E R O U B L E S H O O T I N G
Problem
Power indicator is
OFF when
device is powered
on.
DSL indicator is OFF
when the telephone
line is connected.
When
telephone line
connected, DSL
indicator alternates
between slow and
fast flashing.
9
Troubleshooting
Make sure to use the power adapter included in the
the
package. Make sure that the adapter is connected properly
to the device and power outlet.
Make sure to use standard telephone lines (e.g., the
companion telephone line). Make sure that the lines
are connected properly. Check all the port connections.
Wait for 60 seconds for the device to establish an ADSL
connection.
the
It indicates the connection failure between the device and
is
the office-end DSLAM. Please make sure that the lines are
connected properly. If a telephone is required to be installed
in front of the splitter, make sure to install a voice filter
properly.
Proprietary Information of ZTE CORPORATION 56