Table 9 The Descriptions Of The Static Ip Address Parameters - Zte ZXV10 W300 Maintenance Manual

T 9 T D
A B L E H E E S C R I P T I O N S O F T H E
Parameter
Encapsulation
Static IP
Address
IP Subnet Mask
Gateway
NAT
Default Route
Dynamic Route
Multicast
Note: The parameters listed in Table 9 should be provided by the ISP.
P P P o E / P P P o A
Figure 11 shows the PPPoE/PPPA parameters on the web configuration page
and Table 10 gives the parameter descriptions.
Description
Select the encapsulation type from the dropdown list
Enter the static IP address
Enter the IP subnet mask
Enter the gateway address
Select whether NAT is enabled or disabled
Select whether this PVC will be the default route for the Internet
data
Select the RIP type and direction form the dropdown lists
Select the multicast protocol to be used from the dropdown list
Proprietary Information of ZTE CORPORATION
Chapter 2 - Product Installation
S I P A
T A T I C D D R E S S
P
A R A M E T E R S
21