Table 5 Descriptions For The Indicators - Zte ZXV10 W300 Maintenance Manual

There are eight indicators on the front panel of a W300 indicating the runnin
g status of the device, as shown in Figure 1. These indicators are described i
n Table 5.
T 5 D
A B L E E S C R I P T I O N S F O R T H E
Indicator Color
Red/Gre
Power
en
DSL Green
Internet Green
LAN1
LAN2
Green
LAN3
STB
WLAN Green
I
N D I C A T O R S
Description

Red:Indicates the power is just connected or it fails
to function.

Green Steady on: Indicates switched on.

Off: Indicates the power has not been connected

Steady on: Indicates a DSL link is established.

Slow flashing: Indicates no signal is detected.

Fast flashing: Indicates the MODEM is activating.

Steady on: Indicates operating in Route mode and
the ADSL link is established. The IP data packet of
the MODEM can be transmitted and received
normally (For example, the embedded PPPOE link is
established and a dynamic IP address is allocated.).
Flashing: Indicates operating in Route mode and

there is data packet passing the MODEM.
Off: Indicates operating in Bridge mode or ADSL link

is not established.

Steady on:
established.

Flashing: Indicates data is transmitting.

Off: Indicates the LAN connection has not been
established

Steady on: Indicates the wireless module is on.

Flashing: Indicates wireless data is transmitting.

Off: Indicates the wireless module is off.
Proprietary Information of ZTE CORPORATION
Chapter 2 - Product Installation
Indicates a LAN connection is
3