Upnp Management - Zte ZXHN H108L Maintenance Manual

Parameter
Interface
Direction
IP Filter Rule
Index
Active
Source IP
Address
Subnet Mask
Port Number
Destination IP
Address
Subnet Mask
Port Number
Protocol
Rule Unmatched
Click SAVE to submit the changes, or DELETE to delete the rule
with the parameters, or CANCEL to exit without saving.

UPnP Management

Universal Plug and Play (UPnP) is an open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between
devices. An UPnP device can dynamically join a network, obtain an
IP address, convey its capabilities and learn about other devices on
the network. A device
automatically when it is no longer in use.
Description
Select the interface to be modified. PV0~PV7 and WAN interfaces.
Select which direction of data flow to apply to the filters.
Select IP filter rule index to be modified.
Toggle this rule index ON or OF with Yes or No.
Enter the source IP address to deny access to the ZXHN H108L
router.
Enter the subnet mask of the source IP address.
Enter the port number of the source IP address. 0 means that all
ports are allowed.
Enter the destination IP address to deny access to the ZXHN
H108L router.
Enter the subnet mask of the destination IP address.
Enter the port number of the destination IP address. 0 means that
all ports are allowed.
Select the protocol to filter.
Select what happens to the data in question if the rule currently
editing is unmatched. Next means that the data is then compared
to the next IP filter rule. Forward means that the data will be
allowed into the user system.
can leave
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 - Access Management
a network smoothly and
43