Activating/Deactivating Do Not Disturb - Siemens HiPath500 Operation

Step by Step
> <
Accept call?
> <
Select
extension?
c
> <
Do Not Disturb ON?
c
> <
Do Not Disturb OFF?
Call the additional menu.
Mnu
either:
[
Select the menu item and confirm.
or:
Note:
If several users are called simultaneously, only
the first user called is displayed. However, you
can transfer by entering the phone number of
any of the users called.
[
Select the menu item and confirm.
then:
p
Conduct the call.

Activating/deactivating do not disturb

You can block calls to your handset on a temporary ba-
sis, while still being able to make calls yourself. Internal
callers hear the busy tone, while external callers reach
another telephone defined by the service engineer (in-
tercept position). Authorised internal callers automati-
cally override the do not disturb after five seconds.
Activating do not disturb
d
or Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
a
Press the On-hook key to end the operation.
Deactivating do not disturb
d
or Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
a
Press the On-hook key to end the operation.
Conducting calls – enhanced functions
63