Putting the handset into service
Charging and using the battery pack
To charge the battery pack, insert the handset into the charging shell with
the keypad facing forwards.
The charging status is indicated by the charge status display. This flashes
during charging:
=
e
V
U
18
Attention:
Only use the relevant approved power supply units for operating
the charging shell (for order numbers see
Battery pack is flat
Battery pack is 33% charged
Battery pack is 66% charged
Battery pack is 100% charged
Note:
•
Initial charging: Charge the battery pack for at least 10 hours
without a break, regardless of the charging status icon. With-
out replacing it in the charging shell, use the handset until the
"battery low" beep is heard. This action aligns the charge status
display with the operating times of the battery pack.
•
To attain full operating and charging times (
out replacing it in the charging shell, use the handset until the
"battery low" beep is heard.
•
For future charging: you can place your handset in the charging
shell each time it is used. Charging is electronically controlled
which ensures that the battery pack is charged optimally.
Page 126).
Page 19): With-