Download  Print this page

First Steps; Check The Pack Contents; Connecting The Base Station - Siemens Gigaset AL110A Manual

Hide thumbs

Advertisement

Table of Contents

First steps

Check the pack contents

One Gigaset AL110 base station,
one mains adapter,
one Gigaset AL110H handset,
one phone cord,
one battery pack,
one battery cover,
one user guide.
If you have purchased a model with multiple handsets, the package should contain one bat-
tery pack, a battery cover and a charging cradle with mains adapter for each additional hand-
set.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a tem-
perature range of +5 °C to +45 °C.
¤
Set up the base station at a central location on a flat, non-slip surface in your house or
apartment.
Pay attention to the range of the base station.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The
range is reduced when Eco Mode is activated (
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of
different varnishes and polishes used on today's furnishings, the occurrence of marks on the
surfaces cannot be completely ruled out.
You can also mount the base station and charging cradle on the wall.
Please note:
Never expose the telephone to the influence of heat sources, direct sunlight or other elec-
trical devices.
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

Connecting the base station

¤
First connect the mains adapter 1.
¤
Then connect the telephone jack
insert the cables into the cable ducts.
Please note:
The mains adapter must always be con-
nected, as the phone will not operate
without mains connection.
Only use the mains adapter and phone
cord supplied. Pin connections on tele-
phone cables can vary.
Please note
3
¢
p. 19).
1
1
and
2
2
1

Advertisement

Table of Contents
loading

  Also See for Siemens Gigaset AL110A