Panasonic KX-TDA50 Installation Manual page 53

Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1.
Place the reference for wall mounting (on the last page of this manual) on the wall to mark
the three screw positions.
130 mm (5-1/8 in)
2.
Install three anchor plugs (user-supplied) in the wall.
Anchor Plug
Hammer
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
4.
Hook the main unit on the screw heads.
250 mm
(9-13/16 in)
6.4 mm
(1/4 in)
29 mm
(1-1/8 in)
2.2 Installation of the Hybrid IP-PBX
Installation Manual 53