Panasonic KX-TDA50 Installation Manual page 104

2.7 Connection of 2.4 GHz Portable Stations
Registering the PS
The PS must be registered to the Hybrid IP-PBX before it can be used. Programming of both
the PS and Hybrid IP-PBX is required. A PT with multiline display (e.g., KX-T7636 6-line
display) is required for the Hybrid IP-PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" and
"3.3 PT Programming" in the Feature Guide.
Entering the System Programming Mode
PT (Administrator Level)
PROGRAM/
PAUSE
PS (Using the KX-TD7680)
Press POWER
for 2 seconds.
If required
System Lock Password
PS (Using the KX-TD7690)
Press POWER
for 2 seconds.
If required
System Lock Password
Note
means default value throughout this section.
PS Registration
[690]
104 Installation Manual
System Password for Administrator—
#
for PT Programming
FUNC
Select
"PS PROGRAM".
4 digits
MENU
Select
S1
"PS PROGRAM".
ENTR
4 digits S1
PS No.
001 to 028
ENTER
= 1234
Select
"SYSTEM SET".
System Setting Menu
SEL
Select
S1
"SYSTEM SETTING".
System Setting Menu
Extn. No.
1 to 4 digits
ENTER
Programming No.
3 digits
SEL
S1
To the PS
operation
END
below