Panasonic KX-TDA50 Installation Manual page 128

3.3 Installation of the Hybrid IP-PBX PC Programming Software
Starting the KX-TDA50 Maintenance Console and Assigning the
Basic Items (Quick Setup)
When you start the KX-TDA50 Maintenance Console with the Installer Level Programmer
Code and connect to the Hybrid IP-PBX for the first time after initialization (with the factory
default setting), Quick Setup will launch automatically. During Quick Setup, you will setup the
following basic items:
• Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
• System Password for installer for PC programming.
• Operator extension numbers. Operator extensions for all time modes (day/lunch/
break/night) can be assigned.
• Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with
must prefix all feature numbers (except access numbers) when an extension user
wants to use a feature.
• Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for
operator call and Idle Line Access/ARS can be selected.
• Remote Maintenance Dial Number. Enter the complete telephone number of the
Hybrid IP-PBX (including the country code). When necessary, this number will be
used to access the Hybrid IP-PBX from a remote location for maintenance purposes.
128 Installation Manual
1. Connect the PC to the Hybrid IP-PBX with a
USB cable.
2. Start the "KX-TDA50 Maintenance
Console" from the Start menu.
3. Type the Installer Level Programmer Code
(default: INSTALLER), then click [OK].
The Programmer Code authorizes different
programming levels, and the Quick Setup is
only available when you start the KX-TDA50
Maintenance Console with the Installer Level
Programmer Code.
Note
There are 2 other Programmer Codes
with limited authorization: Administrator
Level (default: ADMIN), and User Level
(default: USER).
4. Click "Connect" "USB" from the menu bar.
) is selected, " "