PROBLEM
•
Noise is frequent while
using the PS.
•
Conversations
disconnect while using
the PS.
•
PS stays out of service
when the CS status is
changed from Out of
Service to In Service.
PROBABLE CAUSE
•
Call handover is not
working while using the
PS.
•
PS is out of CS coverage
area.
•
It may take about 10 s
for CS to start up after
the status has been
changed to In Service.
SOLUTION
•
Locate the CS properly (refer to "2.7.5
Site Survey" ).
•
Wait until the CS starts up.
Installation Manual
4.1 Troubleshooting
141