Helmet Cable - Ducati Hypermotard Owner's Manual

Helmet cable

Remove seat as described in paragraph "Seat Lock
page 158".
Remove cable (1) from seat.
Pass the cable (1) through the helmet and insert the
ends of the cable in the frame pin (2).
Leave the helmet hanging and refit the seat to hold it
in place.
Attention
This device protects the helmet against theft
when the motorcycle is parked. Do not leave the
helmet attached when riding the motorcycle; it could
interfere with your movements and cause loss of
control of the motorcycle.
160
1
2
Fig 108
Fig 109