Immobilizer Code (Pin Code) - Ducati Hypermotard Owner's Manual

Immobilizer code (PIN CODE)

This function makes it possible to temporarily turn on
the motorcycle if the Immobilizer System is not
working.
Note
The PIN CODE function must be activated by
entering your 4 digit PIN in the instrument panel,
otherwise the vehicle cannot be turned on
temporarily in the case of a malfunction.
To view this function, access the Setting menu, and
press button (4) to enter the "PIN" page.
- If the PIN CODE has not been entered yet, the
"PIN Activation (INSERT NEW PIN)" function will
be displayed.
- If the PIN CODE has already been entered, the
"PIN Editing (MODIFY PIN CODE)" function will
be displayed.
In order to temporarily start the vehicle in case of
malfunction of the Immobilizer system, please refer
to the "Entering the PIN code to unlock the
vehiclepage 116".
106
Attention
The motorcycle owner must activate (store) the
PIN code; if there is already a stored PIN, contact an
Authorized Ducati Dealer to have the function "reset".
To perform this procedure, the Authorized Ducati
Dealer may ask you to demonstrate that you are the
owner of the motorcycle.