Engine Set Up - Ducati Hypermotard Owner's Manual

ENGINE set up

This function customizes ENGINE power and output.
To display this function, access the Setting Menu and
select the "R.MODE" page. Use buttons (1) and (2) to
select the riding mode you wish to edit, then press
button (4).
Use keys (1) and (2) to select the "ENGINE" indicator,
then press button (4) to access the setup page..
Now, always using buttons (1) and (2), you can
increase or decrease ENGINE level; press button (4)
to confirm the new level.
The different settings are HIGH, MEDIUM and LOW.
Once the new setup is selected, press button (4). The
instrument panel will automatically highlight the
"MEMORY" indicator; to store the new setup, keep
button (4) pressed for 3 seconds.
After this time, the instrument panel will display the
"MEMORIZED" indicator for 2 seconds as a
confirmation of the change made. The "EXIT" indicator
will be automatically highlighted; press button (4) to
quit this page and go back to the setting menu.
86
Note
If on DEFAULT lettering right side a symbol is
displayed, this means that the default setup is active,
namely that the parameters shown are those set up
by Ducati.