Configuration; Enable Real Time Probes; Set Up Real Time Probes; Exclude An Ip Address From Real Time Probing - 8e6 Technologies R3000IR User Manual

G A
LOBAL DMINISTRATOR
312
S C 4: R
ECTION HAPTER

Configuration

Enable Real Time Probes

1. On the Configuration tab, click "On".
2. Click Save to enable the Real Time Probes feature. As a
result, all elements in this window become activated.

Set up Real Time Probes

1. Enter the Maximum Probes to Run/Schedule Simulta-
neously, up to 99 probes. The default setting is 10
probes.
2. Enter the Maximum Probes that can be Scheduled,
equal to or less than the maximum probes that can run at
the same time. The default setting is 5 probes.
3. Enter the Maximum Run Time in Minutes the probe will
search for URLs, up to 1440 minutes (24 hours). The
default setting is 1000 minutes.
4. Enter the Maximum Report Lifetime in Days to keep a
saved report before deleting it. The default setting is 7
days.
5. Click Save.

Exclude an IP Address from Real Time Probing

1. Enter the Excluded IP Address of a machine to be
bypassed from real time probing.
2. Click Add to add the IP address in the Current White list
of IPs.
EPORTING SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE