Modify Sub-Group Members - 8e6 Technologies R3000IR User Manual

G A
ROUP DMINISTRATOR
378
S C 1: G
ECTION HAPTER

Modify Sub-Group Members

The Modify Sub Group Member frame is comprised of the IP
Address and MAC Address frames.
1. In the IP Address frame, specify whether to add or edit an
IP address range with or without a netmask by selecting
either "Member IP" or "Member IP Start / End".
• If "Member IP" was selected, enter the IP address and
specify the netmask in the Member IP fields.
• If "Member IP Start / End" was selected, enter the
Member IP Start and End of the IP address range.
TIP: Click Calculator to open the IP Calculator, and calculate IP
ranges without any overlaps.
2. If using the mobile mode to filter end users, any Source
MAC addresses previously added in the master IP
group's Members window display in the MAC Address
frame. Specify whether or not to add/remove MAC
addresses to/from the sub-group:
• To add MAC addresses to the sub-group, select each
sub-group by highlighting it in the Available MAC(s) list
box, and then clicking the left arrow to move the
item(s) to the Member MAC(s) list box.
• To remove MAC addresses from the sub-group, select
each sub-group by highlighting it in the Member
MAC(s) list box, and then clicking the right arrow to
move the item(s) to the Available MAC(s) list box.
TIPS: Multiple MAC addresses can be moved to a list box by
clicking each MAC address while pressing the Ctrl key on your
keyboard, and then clicking the arrow key pointing to that list box.
Blocks of MAC addresses can be moved to a list box by clicking
the first MAC address, and then pressing the Shift key on your
keyboard while clicking the last MAC address, and then clicking
the arrow key pointing to that list box.
3. Click Modify to apply your settings.
ROUP SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE