Add Group; Add A Master Ip Group - 8e6 Technologies R3000IR User Manual

Enterprise filter

Hide thumbs Also See for R3000IR:

Table of Contents

Add Group

From the IP group menu:

1. Choose Add Group to open the Create New Group dialog

2. Enter up to 20 characters for the Group Name.

NOTES: The name of the master IP group must be less than 20

characters; cannot be "IP", "NT", or LDAP", and cannot contain

spaces. The first character cannot be a digit.

The following characters cannot be used in the name: "." (period),

"," (comma), ":" (colon), ";" (semi-colon), "!" (exclamation point),

"?" (question mark), "&" (ampersand), "*" (asterisk), """ (quotation

mark), "'" (apostrophe), "`" (grave accent mark), "~" (tilde), "^"

(caret), "_" (underscore), "|" (pipe), "/" (slash), "\", (backslash)",

"\\" (double backslashes), "(" (left parenthesis), ")" (right paren-

thesis), "{" (left brace), "}" (right brace), "[" (left bracket), "]" (right

bracket), "@" (at sign), "#" (pound sign), "$" (dollar sign), "%"

(percent sign), "<" (less than symbol), ">" (greater than symbol),

"+" (plus symbol), "-" (minus sign), "=" (equals sign).

3. Enter the Password, and re-enter it in the Confirm

4. Click OK to add the group to the tree.

Fig. 2:2-28 Create New Group box

Password field.

DMINISTRATOR