View The Sync Status Of Targets From The Source - 8e6 Technologies R3000IR User Manual

G A S C 1: S
LOBAL DMINISTRATOR ECTION HAPTER YSTEM SCREEN

View the Sync Status of Targets from the Source

If the server is set up in the Source mode, the R3000
System Time displays at the top of the Target(s) Status
frame. This is the current date and time from the R3000
server—using the YYYY/MM/DD and HH:MM:SS format—
and includes the UTC code for the time zone.
For each target server, the grid displays the IP address,
Location, and Sync Status ("OK" if the target server can be
accessed by the source server, "SYNCING" if synchroniza-
tion is occurring, and "FAULT" if the target server cannot be
reached or if there is a problem with synchronization). The
Last Sync Date column displays the date and time synchro-
nization last occurred for the target server.
TIPS: The order in which columns display in the grid can be
changed by clicking the column header and sliding the column to
another position in the grid.
To change the sort order, click the header of a column. All rows
will sort in descending order by that column.
If text in any column displays truncated—followed by ellipses
(...)—place the cursor over the beginning or ending of the column
header. When the <—> character displays in place of the cursor,
you can expand the width of the column. You also can use the
scrollbar beneath the grid to view information to the right of the
last column.
145
8 6 T , R3000 E F U G
E ECHNOLOGIES NTERPRISE ILTER SER UIDE