Configuration; Set Up Blocking Criteria - 8e6 Technologies R3000IR User Manual

G A
LOBAL DMINISTRATOR
178
S C 1: S
ECTION HAPTER
NOTES: The X Strikes Blocking topic does not display if the
synchronization feature is used, and this server being configured
is set up in the Target mode to synchronize both profile and
library setting changes.
X Strikes Blocking settings are effective only for filtering profiles
with the X Strikes Blocking filter option enabled. (See Filter
Options in the Group screen section for information on setting up
the X Strikes Blocking filter option.)

Configuration

Set up Blocking Criteria

1. At Reset the X-Strike count upon authentication, "Off"
is selected by default. To have all strikes reset before an
end user is authenticated, click "On".
2. Enter the Maximum Strikes Before "Locking" the
Workstation. This is the number of attempts a user can
make to access an unacceptable site before that user is
prevented from using the Internet. The default is 5, and
the maximum limit is 1000.
3. Enter the Time Span in Minutes to Track the No. of
Strikes Within Category. This is the amount of time
between a given user's first strike and the strike that will
lock out that user from his/her Internet access. The
default setting is 5, and the maximum limit is 1440
minutes (24 hours).
4. Enter the number of seconds for the Flood Tolerance
Delay, which is the maximum amount of time that will
elapse before a user who accesses the same inappro-
priate URL will receive another strike. The default setting
and the maximum limit is 4 seconds.
5. Specify the "Locked" Life Time (Measured in
Minutes), which is the number of minutes a user's work-
station will be locked. Choose either "Unlimited", or
"Defined".
YSTEM SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE