Synchronized, Non-Synchronized Items - 8e6 Technologies R3000IR User Manual

Enterprise filter

Hide thumbs Also See for R3000IR:

Table of Contents

Synchronized, Non-Synchronized Items

YNCHRONIZING

It is important to note that while some items are synchro-

nized to the target R3000s, they do not become permanent

configurations on the target R3000. These items are in

essence functionally synchronized, since they are configu-

rations that the target R3000s will read from the source

R3000 upon load. These items will then be updated on an

as needed basis from the source R3000. For purpose of

differentiation, these items will be referred to as functionally

synchronized for purposes of this user guide. These func-

tionally synchronized items will be available for use on the

target R3000.

The following options are available for synchronization:

Synchronize all items (both profile and library changes), and

synchronize only library items.

As you will see by the lists on the following pages, static

configuration options—such as library changes—will be

synchronized. All active options—such as profile changes—

will be functionally synchronized. One time configuration

options on the R3000—such as reporting configurations, or

IP addresses—will not be synchronized.