Apply Settings - 8e6 Technologies R3000IR User Manual

G A
LOBAL DMINISTRATOR
172
S C 1: S
ECTION HAPTER
4. In the Forward Mode field, specify whether accounting
request packets will be delivered from the client (NAS or
proxy server) to the Radius accounting server.
To enable the Forward Mode option:
• Click the "On" radio button. The NAS will forward
accounting request packets to the Radius accounting
server.
• Check the box for Use R3000 IP as Source IP, if the IP
address of the R3000 server (LAN1 or LAN2) should
be used when forwarding packets instead of the IP
address of the NAS.
To disable the Forward Mode option, click the "Off" radio
button. This action causes the Use R3000 IP as Source
IP field to display greyed out.
5. In the Reply Mode field, specify whether the server that
sent a request should receive a response.
To enable the Reply Mode option:
• Click the "On" radio button. A reply and accounting
response packet will be submitted to the sender (NAS
or Radius server).
• Enter an Authenticated Phrase to be shared by the
Radius server and NAS.
• At the Copy Proxy State field, click the "On" radio
button if you wish to copy the proxy state attribute to
the packet.
NOTE: The copy proxy state attribute will only be added to the
response packet if the Reply Mode is "On". If the Radius
accounting server is in the Forward Mode and the Reply Mode is
"Off", the copy proxy state attribute will be forwarded to the desti-
nation server but will not reply back to the client.

Apply Settings

Click Apply to save your settings.
YSTEM SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE