Enable Snmp; Specify Monitoring Settings; Set Up Community Token For Public Access; Create, Build The Access Control List - 8e6 Technologies R3000IR User Manual

Enterprise filter

Hide thumbs Also See for R3000IR:

Table of Contents

for each disk partition, time elapse since the box was last

rebooted, and the amount of memory currently in usage.

Enable SNMP

The Monitoring mode is "Off" by default. To enable SNMP,

click Enable in the Monitoring Mode frame. As a result, all

elements in this window become activated.

Enter the password to be used as the Community token

for public access. This is the password that the manage-

ment R3000 console would use when requesting access.

1. In the Enter new IP to add field, enter the IP address of

2. Click Add to include the entry in the Access control list

3. After all entries are made, click Save Changes.

1. To remove one or more IP addresses from the list, select

2. Click Delete.

3. Click Save Changes.

an interface from/to which the SNMP should receive/

Repeat steps 1 and 2 for each IP address to be included

in the list.

each IP address from the Access control list, using the

Ctrl key for multiple selections.

DMINISTRATOR

YSTEM SCREEN