Chapter 7: View Hard Disk Status - 8e6 Technologies TAR User Manual

A S
DMINISTRATION ECTION

Chapter 7: View Hard Disk Status

160
C 7: V H
HAPTER IEW ARD
This chapter explains how the global administrator views
the hard disk status on a TAR-SL, TAR-HL, or TAR-H server
with RAID.
1. In the navigation panel, click Administration to open that
menu.
2. Click Hardware Detector to open the Hardware Detector
window:
Fig. 5:6-6 Hardware Detector, hard disks OK
NOTE: If the TAR server is a TAR-S or TAR-MSA unit, when
clicking Hardware Detector, the following message displays in a
pop-up box: "This is not a RAID box!" Click the "X" in the upper
right corner to close the pop-up box.
If no hard disk failure has been detected on the TAR
server with RAID, the status of each hard drive displays
as "OK" and the following message displays at the
bottom of the window: "All harddisks are working prop-
erly."
If a hard disk failure has been detected, the affected hard
drive image displays in red with the message "FAIL," and
D S
ISK TATUS
8 6 T ,
T
E ECHNOLOGIES HREAT
U G
A R
NALYSIS EPORTER SER UIDE