Rear Panel Of An Ex2200 Switch; Figure 4: Front Panel Of An Ex2200-C Switch With 12 Gigabit Ethernet Ports - Juniper EX2200 Series Hardware Manual

Rear Panel of an EX2200 Switch

Copyright © 2011, Juniper Networks, Inc.
Figure 3: Front Panel of an EX2200-C Switch with 12 Gigabit Ethernet
Ports (PoE+)
Network ports
Figure 4: Front Panel of an EX2200-C Switch with 12 Gigabit Ethernet
Ports (non-PoE)
The rear panel of the EX2200 switch except the EX2200-C switch models consists of
the following components:
Management Ethernet port
USB port
Console port
Protective earthing terminal
ESD point
Air exhaust
Serial number ID label
AC power cord inlet or DC power terminals
Figure 5 on page 8 shows the rear panel of an EX2200 switch with an AC power supply.
All EX2200 switches except the EX2200-C switch model have three exhaust openings
on the rear panel. The two exhaust openings on the left have fans behind them and are
open. The exhaust opening on the right is open on Power over Ethernet (PoE) models
and closed on non-PoE models. On PoE models, this opening exhausts the air from the
fan at the air intake for the power supply on the side panel.
The power cord retainer clips extend out of the chassis by 3 in.
Chapter 1: EX2200 Switch Overview
Dual-purpose
USB
uplink ports 0
port
Dual-purpose
uplink ports 1
Console
port
Management Mini USB
port port
7