Juniper EX2200 Series Hardware Manual page 153

Juniper networks switch user manual
Hide thumbs Also See for EX2200 Series:
Table of Contents

Advertisement

Copyright © 2011, Juniper Networks, Inc.
EX4500 switch—Connect the cable to the port labeled
of the switch.
EX8200 switch—Connect the cable to the port labeled
and Routing Engine (SRE) module in slot SRE0 in an EX8208 switch or on the
Routing Engine (RE) module in slot RE0 in an EX8216 switch.
These ports are configured as the DHCP server with the default IP address,
The switch can assign an IP address to the management PC in the IP address range
192.168.1.2
through
192.168.1.253
From the PC, open a Web browser, type http://192.168.1.1 in the address field, and
3.
press Enter.
On the J-Web login page, type root as the username, leave the password field blank,
4.
and click Login.
On the Introduction page, click Next.
5.
On the Basic Settings page, modify the hostname, the root password, and date and
6.
time settings:
Enter the hostname. This is optional.
Enter a password and reenter the password.
Specify the time zone.
Synchronize the date and time settings of the switch with the management PC or
set them manually by selecting the appropriate option button. This is optional.
Click Next.
Use the Management Options page to select the management scenario:
7.
NOTE:
On EX4500 and EX8200 switches, only the out-of-band
management option is available.
In-band Management—Use VLAN 'default' for management.
Select this option to configure all data interfaces as members of the default VLAN.
Click Next. Specify the management IP address and the default gateway for the
default VLAN.
In-band Management—Create new VLAN for management.
Select this option to create a management VLAN. Click Next. Specify the VLAN
name, VLAN ID, member interfaces, management IP address, and default gateway
for the new VLAN.
Out-of-band Management—Configure management port.
Select this option to configure only the management interface. Click Next. Specify
the IP address and default gateway for the management interface.
Chapter 11: Performing Initial Configuration
MGMT
MGMT
.
on the front panel
on the Switch Fabric
.
192.168.1.1
133

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents