Connecting Using Wireless Lan Access Point Mode - Sony PXW-X500 Operation Manual

If not using the IFU-WLM3
Do not attach the guard.
Connecting using Wireless LAN
Access Point Mode
The camcorder can connect to devices that are set
up as an access point.
Smartphone/
Tablet
To connect using WPS-equipped devices
Devices that support WPS can be connected using
WPS.
1
Select Maintenance >Wi-Fi >Setting in
the setup menu.
2
Turn the MENU knob to select [Access
Point], then press the knob.
Computer
81
Note
It may take some time (30 seconds to 1 minute) to enable
access point mode. Wait until the Wi-Fi "AP" (access
point) indicator (see page 26) stops flashing on the LCD
monitor or in the viewfinder.
3
Select Maintenance >Wi-Fi >WPS in
the setup menu.
4
Turn the MENU knob to select
[Execute], then press the knob.
5
Open the device Network Settings or
Wi-Fi Settings, and turn Wi-Fi on.
6
Select the camcorder SSID from the
Wi-Fi network SSID list, display
Option, and select WPS Push Button.
Note
The steps will vary depending on the device used.
7
Launch a browser on the device and
enter "http://192.168.1.1:8080/
index.html" in the URL bar.
The user name and password entry screen
appears.
8
Enter a user name and password, then
select [OK].
For the user name and password for access
authentication, see Maintenance >Basic
Authentication (see page 135) in the setup
menu.
To connect using SSID and password on
the device
Connect by entering the SSID and password on
the device.
1
Select Maintenance >Wi-Fi >Setting in
the setup menu.
2
Turn the MENU knob to select [Access
Point], then press the knob.
Note
It may take some time (30 seconds to 1 minute) to enable
access point mode. Wait until the Wi-Fi "AP" (access
point) indicator (see page 26) stops flashing on the LCD
monitor or in the viewfinder.