Loading Setting Data; Resetting A File After Changing Its Contents - Sony PXW-X500 Operation Manual

To change the File ID
1
Select File >All File >File ID in the setup
menu.
A screen for editing the File ID appears.
2
Select characters and enter the File ID.
3
Turn the MENU knob to select [Done],
then press the knob.
The File ID is updated.

Loading Setting Data

Note
When you load a file from an SD card, the data saved in
the camcorder's internal memory is overwritten.
1
Select File >All File >Load SD Card in
the setup menu.
An ALL file list screen appears.
2
Turn the MENU knob to select a file to
load, then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select
[Execute], then press the knob.
Note
When loading files from one device to another, if
the firmware versions on the two devices do not
match, the setting values for functions that are not
supported on the destination device will be set to
preset values.
If an error message appears
One of the following error messages may appear
during execution of the load, or as soon as you
select [Execute]. In this case, the file is not
loaded.
Error message Problem
NG:No Data • There is no
readable media
• The specified
file does not
exist on the
media
Resetting a File after Changing Its
Contents
1
2
What to do
Insert the
media that
contains the
file you want.
146
Select File >All File >Clear All Preset in
the setup menu.
A confirmation screen appears.
Turn the MENU knob to select
[Execute], then press the knob.
All the settings in the ALL file are reset to the
preset values.