Sony PXW-X500 Operation Manual page 135

Maintenance
Item
DCC Adjust
Makes settings related to
DCC (dynamic contrast
control).
Genlock
Makes settings related to
genlock.
Auto Shading
Executes auto black shading
correction.
APR
Makes settings related to
automatic pixel noise
reduction.
Basic Authentication
Makes settings related to
basic authentication.
Sub-item setting
DCC Function Select
DCC/Fix
DCC D Range
400%/450%/500%/550%/
600%
DCC Point
–99 to ±0 to +99
DCC Gain
–99 to ±0 to +99
DCC Delay Time
–99 to ±0 to +99
DCC Peak Filter
–99 to ±0 to +99
Genlock
On/Off
Reference
Internal/External(HD)/
External(SD)
Auto Black Shading
Execute/Cancel
Reset Black Shading
Execute/Cancel
Master Gain (TMP)
–6dB/–3dB/0dB/3dB/6dB/
9dB/12dB/18dB/24dB/
30dB/36dB/42dB
APR
Execute/Cancel
Reset
Execute/Cancel
User Name
(Displays the current user
name.)
Password*******
135
Description
Selects the setting method for the knee point
when the OUTPUT/DCC switch is set to CAM
with DCC on.
DCC: Automatically adjusts the knee point to
match the luminance of the subject.
Fix: Sets the knee point to a fixed value.
Sets the dynamic range when the OUTPUT/DCC
switch is set to CAM with DCC on.
Sets the DCC minimum knee point.
Sets the gain relative to the DCC detected value.
Sets the DCC control speed (speed of response to
changes in the video).
Adjusts the response sensitivity relative to the
peaks in DCC detected values.
Turns the genlock function on/off.
Displays the type of reference signal used by the
camcorder.
Executes auto black shading correction (execute
by selecting Execute).
Clears the black shading correction value
(execute by selecting Execute).
Sets a temporary master gain value. (The value is
the same as the value selected with the GAIN
switch.)
Executes the automatic pixel noise reduction
function to suppress white flecks in SLS mode
(execute by selecting Execute).
Deletes white flecks data that were added by
execution of the APR and automatic black
balance adjustment functions (execute by
selecting Execute).
Sets the user name (arbitrary name for basic
authentication). Set to "admin" by factory
default.
Sets the password (for basic authentication). Set
to "pxw-x500" by factory default.