Sony PXW-X500 Operation Manual page 115

Operation
Item
Auto Iris
Sets the auto iris.
Zebra
Sets the display of zebra
patterns.
Sub-item setting
Iris Override
On/Off
Mode
Backlight/Standard/
Spotlight
Level
–99 to ±0 to +99
Speed
–99 to ±0 to +99
Clip High Light
On/Off
Detect Window
1/2/3/4/5/6/Var
Detect Window Indication
On/Off
Iris APL Ratio
–99 to ±0 to +99
Iris Var Width
40 to 500 to 999
Iris Var Height
70 to 500 to 999
Iris Var H Position
–479 to 0 to 479
Iris Var V Position
–464 to 0 to 464
Zebra Select
1/2/Both
Zebra1 Level
50% to 70% to 107%
Zebra1 Aperture Level
1 to 10% to 20%
Zebra2 Level
52% to 100% to 109%
115
Description
Turns iris override (setting opens or closes the
iris more than normal) on/off.
Selects the control mode of the auto iris.
Backlight: Backlight mode (mode for reduced
darkening of a subject when the subject is
backlit)
Standard: Standard mode (cannot be selected
when using optional remote control
connection)
Spotlight: Spotlight mode (mode for reduced
blown out highlights when subject is lit by
spotlighting)
Sets the convergence target level (larger values
increase brightness.)
Sets the control speed (speed of response to
changes in the video). (Larger values specify
quicker reaction times.)
Turns the function that ignores brightest areas to
provide a flatter reaction to high luminance
on/off.
Selects the type of auto iris detection window.
Var: Variable
Turns the function that displays the auto iris
detection window frame using a marker on/off.
If the Mode setting for Auto Iris is set to
Standard, sets the mix ratio of peak to mean auto
iris detection value.
Sets the width of the window when Iris Window
is set to Var.
Sets the height of the window when Iris Window
is set to Var.
Sets the horizontal position of the window when
Iris Window is set to Var.
Sets the vertical position of the window when Iris
Window is set to Var.
Selects the zebra pattern type (Zebra 1, Zebra 2,
Both).
Sets the Zebra 1 display level.
Sets the Zebra 1 aperture level.
Sets the Zebra 2 display level.