Filtering Clips (Frames) Using The Essence Mark Thumbnail Screen; Changing The Index Picture Of A Clip - Sony PXW-X500 Operation Manual
Solid-state memory camcorder
Hide thumbs
Also See for PXW-X500:
- Manual (211 pages) ,
- Service manual (184 pages) ,
- Operation manual (103 pages)
Table of Contents
Advertisement
Filtering Clips (Frames) using the
Essence Mark Thumbnail Screen
The essence mark thumbnail screen displays only
those frames in a clip where an essence mark has
been recorded in thumbnail view. Display the
thumbnail screen, then either press the ESSENCE
MARK button (see page 18) or use the following
procedure to display the essence mark thumbnail
screen.
1
Select Thumbnail >Thumbnail View
>Essence Mark Thumbnail in the setup
menu.
2
Turn the MENU knob to select an
essence mark used to filter frames, then
press the knob.
Setting
Description
All
All frames with added
essence marks
Rec Start
Frames with a recording start
mark and the first frame of
clips that do not have a
recording start mark
Shot Mark0 to
Frames with each shot mark
Shot Mark9
The essence mark thumbnail screen appears
filtered by the selected essence mark.
If a clip is recorded using planning metadata that
defines names for shot mark 0 to shot mark 9, the
selection options in the list are displayed by the
defined names.
Changing the Index Picture of a
Clip
You can set the frame selected on the essence
mark thumbnail screen as the index picture for the
clip.
Select the thumbnail of the frame you want to set
as the index picture for the clip, then select
Thumbnail >Set Index Picture in the setup menu.
Page 99
- Quick Links:
- Error Messages
Hide quick links:
Advertisement
Table of Contents
