Connecting To The Internet - Sony PXW-X500 Operation Manual

7
Press the access point WPS button.
For details about WPS button operation, refer
to the instruction manual for the access point.
When the connection is successful, the Wi-Fi
level indicator (see page 26) will show a
strength of 1 or higher on the LCD monitor or
in the viewfinder.
Note
If the connection fails, perform the procedure again from
step 1.
8
Connect the device to the access point.
For details about how to connect, refer to the
instruction manual for each device.
9
Launch a browser on the device and
enter "http://<IP_address>:8080/
index.html" in the URL bar, where
"<IP_address>" is the IP address
assigned by the access point to the
camcorder.
For the IP address of the camcorder, see
Maintenance >Wi-Fi >IP Address in the
setup menu. The user name and password
entry screen appears.
10
Enter a user name and password, then
select [OK].
The web menu of the camcorder appears.
For details about the web menu, see "Web
Menu" (page 88).
For the user name and password for access
authentication, see Maintenance >Basic
Authentication (see page 135) in the setup
menu.
Connecting to the
Internet
You can connect to the Internet via an access
point that supports 3G/4G/LTE (optional) or by
using tethering.
You connect to the Internet using station mode by
using a 3G/4G/LTE-compatible access point
(optional) that supports wireless LAN station
mode connection or by using device tethering.
Smartphone/
Tablet
Connection method
If the access point and device supports WPS,
connect using the procedure in "To connect to an
access point using WPS" (page 82). If WPS is not
supported, connect using the procedure in "To
connect to an access point in station mode
without using WPS" (page 89).
First, turn the access point and device on, and
configure the device tethering function if
planning to use tethering.
83
Computer
Access
point
Internet