Filtering Clips Displayed Using The Filtered Clip Screen; Adding/Deleting Essence Marks On Clips - Sony PXW-X500 Operation Manual

2
Turn the MENU knob to select a clip
flag, then press the knob.
Setting Added clip flag
Add OK OK
Add NG NG
Add KEEP KP
The clip flag is added to the thumbnail of the
selected clip.
You can also use an assignable switch assigned
with the clip flag function to add clip flags (see
page 140).
To delete a clip flag
1
Select the thumbnail for the clip from
which you want to delete a clip flag,
then select Thumbnail >Set Clip Flag
>Delete Clip Flag in the setup menu.
The clip flag is deleted.
Filtering Clips Displayed using
the Filtered Clip Screen
1
Select Thumbnail >Filter Clips in the
setup menu.
2
Turn the MENU knob to select a clip
flag used to filter clips, then press the
knob.
Setting Filter clip flag
OK OK
NG NG
KEEP KP
None (Clips are not filtered)
The clip screen appears showing the clips
filtered by the selected clip flag. This screen
is referred to as the filtered clip screen.
Adding/Deleting Essence Marks
on Clips
You can add (and delete) essence marks (shot
marks, recording start marks) to any frame in a
clip. You add/delete essence marks on the essence
mark thumbnail screen.
To add a shot mark
1
Select Thumbnail >Thumbnail View
>Essence Mark Thumbnail in the setup
menu.
2
Turn the MENU knob to select [All],
and then press the knob.
3
Select the thumbnail for the frame to
which you want to add the essence mark
on the essence mark thumbnail screen,
then select Thumbnail >Set Shot Mark
in the setup menu.
4
Turn the MENU knob to select one of
the following, then press the knob.
Setting
Add Shot Mark1
Add Shot Mark2
The shot mark is added to the selected frame.
To delete a shot mark
1
Select Thumbnail >Thumbnail View
>Essence Mark Thumbnail in the setup
menu.
2
Select the type of shot mark to delete.
3
Select the thumbnail for the frame from
which you want to delete a shot mark on
the essence mark thumbnail screen,
then select Thumbnail >Set Shot Mark
in the setup menu.
4
Turn the MENU knob to select one of
the following, then press the knob.
Setting
Delete Shot Mark1
Delete Shot Mark2
The shot mark is deleted from the selected
frame.
98
Operation
Adds shot mark 1
Adds shot mark 2
Operation
Deletes shot mark 1
Deletes shot mark 2