Monitoring File Transfers (Job List) - Sony PXW-X500 Operation Manual

To register a new destination server
Tap [Create New] to display a configuration
screen.
After specifying settings, tap [OK] to apply the
settings. Tapping [Cancel] discards the settings.
Item Description
Default Server Set to [On] to set the default
file destination server.
(Displayed at the top of the
server list for file transfers.)
Display Name Enter the name of the server
to display in the list.
Service Displays the type of server.
FTP: FTP server
Host Name Enter the address of the
server.
User Enter the user name.
Password Enter the password.
PASV Mode Enable/disable PASV mode.
Destination Specify a destination
Directory directory.
Using Secure Set whether to use secure
Protocol FTP.
Load Certification Loads a CA certificate.
The certificate to be loaded
must be in PEM format, and
should be written to the root
directory of the SD card with
"certification.pem" file
name.
Clear Certification Clears the CA certificate.
To change registered server settings
Select the server whose settings you want to
change on the Upload Settings screen, then tap
[Edit]. Change the setting on the displayed
configuration screen.
For details about items, see "To register a new
destination server" (page 91).
To delete a registered server
Select the server you want to delete on the Upload
Settings screen, then tap [Delete]. A confirmation
message appears. Tap [OK] to delete the server
and return to the previous screen.
Monitoring File Transfers (Job
List)
You can monitor file transfer status, manage files
in the transfer file list, and start/stop file transfers.
The camcorder supports the FTP resume function
(for continuing file transfer if transfer stops).
Item
Total
Status
Remain time
Transfer data rate
To stop/restart file transfer or delete a
file from the transfer list
1
Select a file.
2
Tap on the top left of the screen.
Select a menu item.
• Abort selected: Stop file transfer.
• Delete from list: Delete the file from the
transfer list.
• Start selected: Start file transfer.
• Select All: Select all files in the list.
• Clear completed: Delete all files that have
been transferred from the list.
91
Description
Progress status of the transfer
of all files
Progress status of the file
being transferred
Predicted remaining transfer
time
Transfer rate