Operating The Menu From The Rm-B170; Operating The Menu From The Rm-B750 - Sony PXW-X500 Operation Manual

which data corresponding to the amount of rotation is
output are called relative value controls.
2) Absolute value switches: Switches (or knobs), such as
toggle switches or slide switches (except most
momentary switches) whose positions must coincide
with their functions are called absolute value switches.
When Maintenance >Camera Config >RM
Common Memory in the setup menu is set to
[On], you can use settings of the paint adjustment
data stored in the main data block even if you
connect the remote control unit. In this case, the
settings stored in the main data block will be
updated when you change the settings on the
remote control unit. Thus, the settings of the paint
data made with the remote control unit will be
retained even after the remote control unit is
removed. However, if the switch position on the
remote control unit differs from the one on the
camcorder, the switch position on the camcorder
takes precedence.
Also, it is possible to keep the settings that are in
effect before you connect the remote control unit.
In this case, you must set the control knobs to
relative value mode on the remote control unit.
For details, refer to the operation manual supplied
with the remote control unit.
Operating the Menu from the
RM-B170
1
Set the DISPLAY switch to the MENU
position.
The menu is displayed on the monitor
connected to the MONITOR connector of the
RM-B170.
2
Select and set menu items using the
MENU SELECT knob and CANCEL/
ENTER switch.
3
When finished, set the DISPLAY switch
to the ON or OFF position to exit the
menu.
For details about RM-B170 operation, refer to
the operation manual of the RM-B170.
Operating the Menu from the
RM-B750
1
Press the MONITOR button, turning it
on, then press the VF MENU button.
The menu is displayed on the RM-B750
display or the monitor connected to the
MONITOR connector of the RM-B750.
2
Select and set menu items using the
MENU SELECT knob, and ENTER
and CANCEL buttons.
3
When finished, press the VF MENU
button to exit the menu.
For details about RM-B750 operation, refer to
the operation manual of the RM-B750.
78