Exchanging The Battery Of The Internal Clock; Specifications; General - Sony PXW-X500 Operation Manual

Exchanging the Battery
of the Internal Clock
The camcorder's internal clock is powered by a
lithium battery. If the message "BackUp Battery
End" appears in the viewfinder, this battery must
be exchanged. Contact a Sony service
representative.

Specifications

General

Mass Approx. 3.8 kg (8 lb 6.0 oz) (body
Dimensions (Unit: mm (inch), excluding
1) The values for dimensions are approximate.
Power requirements
12 V (11 V to 17.0 V) DC
Power consumption
Approx. 35 W (body only, when
Notes
• Do not connect video lights with power consumption
of 50 W or greater.
• When using a battery, do not allow the total power
consumption of connected peripherals to exceed 40 W.
• When using the AC-DN10, do not allow the total
power consumption of connected peripherals to exceed
50 W.
• When using the AC-DN2B, do not allow the total
power consumption of connected peripherals to exceed
85 W.
• Connect only devices with current consumption of
1.8 A or lower to the DC OUT connector.
164
only)
protrusions, body only)
1
332 (13 / )
8
recording in XAVC, with LCD
monitor on)
1)