Sony PXW-X500 Operation Manual page 13

c FILTER selector
Switches between four ND filters built into this
camcorder.
When this selector is used, the new setting
appears on the viewfinder screen for about three
seconds.
FILTER selector ND filter
setting
1 CLEAR
2 1/4 ND (attenuates light to
approximately
3 1/16 ND (attenuates light to
approximately
4 1/64 ND (attenuates light to
approximately
You can change a Maintenance menu setting so
that different white balance settings can be stored
for different FILTER selector positions. This
allows you to automatically obtain optimum
white balance for the current shooting conditions
in linkage with the filter selection.
For details, see "Adjusting the White Balance"
(page 45).
d MENU knob
Changes the item selection or a setting within the
menu (see page 103).
e AUTO W/B BAL (automatic white/
black balance adjustment) switch
Activates the automatic white/black balance
adjustment functions.
WHITE: Adjust the white balance automatically.
If the WHITE BAL switch (see page 15) is
set to A or B, the white balance setting is
stored in the corresponding memory. If the
WHITE BAL switch is set to PRST, the
automatic white balance adjustment function
does not operate.
BLACK: Adjust the black set and black balance
automatically.
You can use the AUTO W/B BAL switch even
when the ATW (Auto Tracing White Balance)
function is operating.
If you push the switch to the WHITE side once
more during the automatic white balance
adjustment, the adjustment is cancelled and the
white balance setting returns to the original
setting.
If you push the switch to the BLACK side once
more during the automatic black balance
adjustment, the adjustment is cancelled and the
black balance setting returns to the original
setting.
f MIC (microphone) LEVEL control
Adjusts the input level of audio channels 1, 2, 3
and 4 (see page 51).
Right side (near the front)
1
/ )
4
1
/ )
16
1
/ )
64
13