Picture View Send Command (^Pic); Cleaning The Touch Overlay And Case; A Note About Wall And Rack Installation - AMX MXTD-1000 Instruction Manual

Picture View Send Command (^PIC)

The ^PIC Send Command stops either mode of Picture View, or starts Preview Mode. For more information, please
refer to the Modero S Series Programming Guide, available at www.amx.com.
All images must be in JPEG format. PNG and other image formats cannot be viewed
through Picture View.

Cleaning the Touch Overlay and Case




A Note About Wall and Rack Installation

Some products are installed in areas of differing temperature and cooling methodologies. These include products
installed in walls, racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must
be taken into consideration to maintain the product within the specified operating temperature.
FIG. 6 shows an AMX device installed in a wall with a filled volume (such as with insulation or concrete), as well as
with a closed volume (such as between studs in an otherwise finished wall). The diagram shows how heat generated by
the device or other devices may have no way to escape, and may build up to levels that may affect device operation.
FIG. 6 Heat convection in filled or closed volume, limited or no convection
In FIG. 7, the diagram displays an AMX device in a typical rack mounting, with full air circulation around the front and
back of the device. In this case, the main concern is with heat building up between components, possibly to levels that
may affect device operation.
MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels
When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and
then apply the cloth to the touch screen.
Do NOT use abrasives of any type to clean the device, as abrasives may permanently damage or remove the
device's finish.
Modero X Series Touch Panels (10.1", 7"& 4.3")
5