Starting Picture View; Preview Mode And Normal Mode - AMX MXTD-1000 Instruction Manual

Modero X Series Touch Panels (10.1", 7"& 4.3")

Starting Picture View

1.
Connect a USB drive to the device. Picture View will automatically recognize all available images on the drive and
start displaying them on the touchscreen.
2.
When the images begin to display, touch any place on the touchscreen to open the configuration popup menu
(FIG. 5). If no selection is made, this menu will remain in place for 15 seconds and then disappear. It may be
accessed again by touching anywhere on the touchscreen.
Stop
Random / A-Z
FIG. 5 Picture View Configuration Popup Menu
3.
On the leftmost amber button, select between Rand (images display at random) and A-Z (images display in
alphabetical order based on the name of the file).
4.
The four gray buttons allow scrolling through saved images and the rate of display:




5.
On the rightmost red button, select the number of seconds a selected image will be displayed in Picture View. This
may be selected between 5, 10, 15, 30, and 60 seconds.
6.
The counter beneath the buttons displays the number of images currently uploaded by the MST-1001 versus the
number detected on the USB drive.

Preview Mode and Normal Mode

Picture View has two modes: Preview Mode and Normal Mode. Preview Mode allows the user to configure Picture View.
Once a USB drive containing images is inserted into the panel, the images will begin to display. Touching any place on
the display will result in the configuration popup to slide from the bottom of the display.
Picture View goes into its Normal Mode when the MST-1001 goes into idle timeout while connected to a USB drive.
Normal Mode displays images until the touchscreen is touched, or some other wakeup event is detected. When the
device goes back into timeout, Normal Mode will return to displaying images until the USB drive is removed from the
device.
4
Counter
Previous image
The Previous Image Saved button returns the display to the first image uploaded by Page View.
The Stop button stops Page View and returns to the default panel page.
The Pause/Resume button allows the display to stop on one particular image. Press it again to resume the
display procession.
The Next Image Saved button returns the display to the last image uploaded by Page View. If the panel has
not accessed all of the images available on a USB drive, Page View will display the last one uploaded to date.
Pause/
Resume
Timer
Next image
MXD/T-100, MXD/T-700 and MXD-430 Modero X Series® Touch Panels