CHECKING THE FRONT AND REAR BRAKE PADS/
CHECKING THE FRONT AND REAR BRAKE HOSES
A
B
A
B
2. Check:
S front brake pad
S rear brake pad
Brake pad wear limit a , b
Wear limit reached ! Replace the brake
pads as a set.
Refer to "FRONT AND REAR BRAKES" in
chapter 7.
Brake pad wear limit
a 0.5 mm (0.02 in)
b 1.0 mm (0.04 in)
A Front brake
B Rear brake
EAS00131
CHECKING THE FRONT AND REAR BRAKE
HOSES
The following procedure applies to all of the
brake hoses and brake hose clamps.
1. Check:
S brake hose 1
Cracks/damage/wear ! Replace.
A Front
B Rear
2. Check:
S brake hose clamp 2
Loose ! Tighten the clamp bolt.
3. Hold the motorcycle upright and apply the
brake several times.
4. Check:
S brake hose
Brake fluid leakage ! Replace the damaged
hose.
Refer to "FRONT AND REAR BRAKES" in
chapter 4.
3-46
CHK
ADJ