REPLACING THE HEADLIGHT BULBS/
ADJUSTING THE HEADLIGHT BEAMS
3-70
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
5. Install:
S headlight bulb holder
6. Install:
S headlight bulb cover (high beam)
S headlight bulb coupler (low beam)
7. Connect:
S headlight coupler (high beam)
S headlight cover (low beam)
EAS00185
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Remove:
S front cowling inner panels
Refer to "COWLINGS".
2. Adjust:
S headlight beam (vertically)
a. Turn the adjusting screw 1 in direction a or
b .
Direction
a
Headlight beam is raised.
Headlight beam is
Direction
b
lowered.
3. Adjust:
S headlight beam (horizontally)
a. Turn the adjusting screw 2 in direction a or
b .
Headlight beam moves to
Direction
a
the left.
Headlight beam moves to
Direction
b
the right.
4. Install:
S front cowling inner panels
Refer to "COWLINGS".
CHK
ADJ