HANDLEBARS
EAS00667
REMOVING THE HANDLEBARS
1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
2. Remove:
S handlebar grip 1
NOTE:
Blow compressed air between the left handle-
bar and the handlebar grip, and gradually push
the grip off the handlebar.
3. Remove:
S throttle cable housing 1
S throttle grip 2
NOTE:
While removing the throttle cable housing, pull
back the rubber cover 3 .
EAS00669
CHECKING THE HANDLEBARS
1. Check:
S left handlebar 1
S right handlebar 2
Bends/cracks/damage ! Replace.
WARNING
Do not attempt to straighten bent handle-
bars as this may dangerously weaken them.
EAS00674
INSTALLING THE HANDLEBARS
1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
4-58
CHAS