Yamaha YZF-R1S Service Manual page 200

FRONT FORK
8. Install:
S rod puller 1
S rod puller attachment 2
(onto the damper rod 3 )
Rod puller
90890-01437, YM-01437
Rod puller attachment
90890-01436, YM-01436
9. Fill:
S front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.53 L (0.47 Imp qt, 0.56 US qt)
Recommended oil
Suspension oil "01" or
equivalent
Front fork leg oil level (from the
top of the outer tube, with the
outer tube fully compressed and
without the fork spring)
76 mm (2.99 in)
NOTE:
S While filling the front fork leg, keep it upright.
S After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
10. Install:
S nut 1
S fork spring 2
S spacer 3
S damper adjusting rod 4
S cap bolt 5
a. Remove the rod puller and adapter.
b. Install the nut.
c. Install the fork spring, and spacer.
NOTE:
Install the spring with the smaller pitch a facing
up A .
4-53
CHAS